When Using Hot Water, The Solution Of Cold Water First And Then Hot Water

1. A water storage electric kitchen treasure is installed under the wash basin and vegetable washing basin. The kitchen treasure for washing hands and vegetables is still used. The current gas water heater is still used for bathing. The problem of this scheme is that although the bathing times are not as frequent as washing hands, it still needs to put cold water for a long time when bathing. At the same time, only a power socket is installed under the wash basin during decoration, Therefore, when installing kitchen treasure under the wash basin, it is necessary to take the open power line on the wall, which is very unsightly; When selecting this scheme, the socket shall be set under the vegetable washing basin in advance.

2. A hot water circulator is installed at the position of the balcony gas water heater. The cold water in the hot water pipeline can be pressed into the cold water pipe through the circulation system, so that the hot water can be produced immediately as soon as the faucet is turned on, which can be circulated all the time (gas consumption), through temperature control and timed circulation (such as setting the circulation after getting up in the morning or before going to bed at night), so as to effectively solve the defects of the first two hot water circulation systems.

3. The water storage electric water heater is installed in the toilet. However, since many walls in the toilet are not load-bearing walls, it is generally impossible to install wall mounted electric water heaters. Only sitting water heaters that can be placed under the wash basin can be installed.

Some netizens choose to buy their own booster pump to make this change. There is no timing or constant temperature. They also need to install multiple remote control or wire control switches, which is time-consuming and laborious. At present, there are more mature products on the market, which can help you solve this problem.