How Can Basin Faucet Be Installed To Achieve Water-saving Effect
Aug 25, 2021
Faucet is an indispensable product in kitchen and bathroom. We can't measure it by its size. However, everything is a double-edged sword, which brings convenience. At the same time, there are many failures. To a large extent, the failure of the faucet is not only determined by the quality of the faucet manufacturer, and its installation module also occupies a large position. Xiaobian specially brings you the installation skills of faucet manufacturers and the most water-saving installation method. Have you mastered it?
The faucet manufacturer requires that the installation of Single Hole Kitchen Faucet should be stable, because the kitchen faucet is used frequently, and it is very easy to loosen when moved around, so the lock nut must be tightened. Now there are some faucet manufacturers' products on the market, which increase the nut fixation for the screw pipe. This kind of stable effect is very good. If the problem of water removal and lifting can be solved, it will be a popular trend in the future.
Faucet manufacturers should pay attention to the diameter of the water outlet when installing the basin faucet. Now most of the water in the market belongs to hard pipe water inlet, so you should pay attention to reserving the height of the upper water outlet. It is most appropriate to 35 cm down from the basin. During installation, the special angle valve must be selected, and the angle valve must be fixed with the cold and hot water pipe of the wall outlet.
When you find that there is a distance between the angle valve and the water pipe on the faucet, you must buy a special extension pipe to connect. Do not use other water pipes to connect, because if the water pressure is large, it is easy to fall off and leak, causing losses to you. If the inlet pipe is too long and exceeds the outlet pipe, the part can be cut off according to your needs. If the angle is not appropriate, it can be moderately bent to the position you need according to your needs. Do not bend hard to 90 ° or more. When installing the basin to remove water, please don't forget to buy the small interface of the faucet from the faucet manufacturer. Before you install, please don't forget to flush the water pipes buried in the wall in advance.
Before installing the thermostatic faucet, please check whether the water pipe is hot on the left and cold on the right. Be sure not to connect the cold and hot water pipe wrong, so as not to prevent the faucet from working normally. Gas and solar water heaters cannot use the constant temperature faucet of faucet manufacturers because the water pressure is too low. When installing thermostatic faucet, please do not forget to install cold and hot water filter screen.
